Review of Best Miter Saw Blade For Cutting Vinyl Plank Flooring
Top Pick
1. SKIL 3601-02 Flooring Saw with 36T Contractor Blade, Red and …
- Brand: Skil
- Manufacturer: Chervon- SKIL
- Color: Red and Black
- Dimensions: Height: 13.0 Inches Width: 20.1 Inches Length: 28.9 Inches Weight: 30.0 Pounds `
Features
- Cuts solid, engineered and laminate flooring with ease
- Makes cross, miter and rip cuts
- Lightweight design for transport and use at any project location
- Miter detents at 0, 22.5 and 45 degrees
- Die-cast aluminum miter and rip fence
- The LED Shadow Line provides high precision cuts with greater accuracy than traditional lasers, while the lightweight design and built-in carrying handle provide convenience and portability.
Best Quality
2. IVY Classic 35056 Swift Cut 10″ 200 Tooth Aluminum & …
- Brand: IVY Classic
- Manufacturer: Ivy Classic Industries
- Color: Silver
- Dimensions: Height: 0.1 Inches Width: 10.0 Inches Length: 10.0 Inches
Features
- Steel blade designed for cutting light gauge aluminum, plastic and vinyl siding up to 1/8″ thick. For material thicker than 1/8” use IVY Classic 36366 10” 80T Non-Ferrous & Plastics Blade.
- CAUTION: BLADE MUST ROTATE IN DIRECTION OF ARROWS
- High carbon-alloy steel blade
- Precision ground teeth with no set for smooth accurate cuts, Swift Cut (Registered Trademark).
- Arbor: 5/8″
Recommended
3. Norske Tools Newly Improved NMAP001 13 inch Laminate Flooring and …
- Brand: Norske
- Manufacturer: Norske Tools Ltd
- Dimensions: Height: 14.0 Inches Width: 18.0 Inches Length: 25.0 Inches Weight: 13.0 Pounds `
Features
- Product Type : Tools
- Cuts A Variety Of Material, Including Laminate Flooring, Fiber Cement Board (Hardieplank , Cemplank ), Engineered Wood And Vinyl Siding Up To 13” Wide And 19/32” Thick
- Compact And Easy To Use; Produces Clean, Precision Cuts With No Splintering And Smooth Finish
- Sturdy High-Quality Steel And Aluminum Construction
4. COMOWARE Circular Miter Saw Blade- 10 inch 80 Tooth, ATB …
- Brand: COMOWARE
- Manufacturer: COMOWARE
- Color: Silver
Features
- UNIQUE DESIGN: PREMIUM TIP, ANTI-VIBRATION DESIGN, LARGE TEETH. General purpose finishing and the 80 teeth tip is made of VC1 tungsten carbide which adds the saw blade’s sharpness and provide extended life of saw blade. The large tooth design allows the blade to be safely sharpened more times. Larger spacing between the teeth is more convenient for chip removal and heat dissipation.
- HIGH QUALITY CARBIDE MATERIAL: Provide the best cutting experience, with good cutting performance. Prolong the service life of Saw Blade, and add the sharpness.
- WIDELY USE: The 10″ saw blade has a 5/8″ diamond arbor which fits into both round and diamond hole blade machine and maintains the stability when in use.
- EXCELLENT ATB STYLE: The ATB style which adds the cutting speed and durability. This helps maximize both the accuracy of the cut and the efficiency of your work, so you can enjoy a job well done and the ability to complete more tasks in less time.
- USE GUIDE: The equipment should be equipped with the safety protection device. When not in use, hang the saw blade away from the damp place to prevent rust.
5. MantisTol 13″ Pro Vinyl floor cutter LVT-330 for VCT,LVT, SPC, …
- Brand: MANTISTOL
- Manufacturer: CutTool Ltd.
- Color: Black
- Dimensions: Height: 14.6 Inches Width: 15.5 Inches Length: 23.6 Inches Weight: 14.0 Pounds `
Features
- The blade of our LVT-330 cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular corners，most of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time！
- Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty.No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time.
- Replacement blade can be got at the online official brand store (MANTISTOL).
- Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank （SPC or RVP）, it is a stone-plastic composite material, which contains stone powder; Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts.If you want to cut it,Each cut can only cut 1/16 inch, which is equal to that each cut is the upper surface of the floor. (requires some skills and control your strength)
- 13″ cutting width and 8mm cutting depth. Straight cut, Angle cut; ” L & 凵” cut, Rip cut and more. Clearly marked measuring guide. 0-45° Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around.
6. EAB Tool Exchange-a-Blade 2100005 9-Inch Laminate Flooring Cutter
- Brand: EAB Tool
- Manufacturer: Exchange A Blade
- Dimensions: Height: 3.5 Inches Width: 10.0 Inches Length: 21.0 Inches Weight: 12.0 Pounds `
Features
- BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8″). will also cut vinyl tile and fiber cement siding such as hardy plank.
- Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8″). will also cut fiber cement siding such as hardier plank
- Country of origin : China
- Angle gauge allows for cuts up to 45 degrees
7. IRWIN 10-Inch Miter Saw Blade, Classic Series, Steel Table (11870)
- Brand: Irwin Tools
- Manufacturer: IRWIN
- Color: silver
- Dimensions: Height: 0.2 Inches Width: 10.8 Inches Length: 11.8 Inches Weight: 1.25 Pounds `
Features
- Precision-ground circular saw teeth for smooth, accurate cuts
- Fully-hardened circular saw blade plate runs truer, longer
- Heavy-gauge, high-carbon steel construction provides extended circular saw blade life
- 180 teeth count with top/face grind
- 10″ blade length with 5/8″ arbor and 0.09″ kerf
- Precision-ground circular saw teeth for smooth, accurate cuts
- Fully-hardened circular saw blade plate runs truer, longer
- Heavy-gauge, high-carbon steel construction provides extended circular saw blade life
- 180 teeth count with top/face grind
- 10″ blade length with 5/8″ arbor and 0.09″ kerf
8. WEN BL1280 12-Inch 80-Tooth Fine-Finish Professional Woodworking Saw Blade for …
- Brand: WEN
- Manufacturer: WEN
- Color: Silver
Features
- Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM
- Perfect for slicing through both hard and softwoods of all kinds
- Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts
- Designed with 80 carbide-tipped teeth for fine-finish wood cutting
- Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws
9. DEWALT 12-Inch Miter Saw Blade, 80-Tooth, 2-Pack (DW3128P5D80I) , Yellow
- Brand: DEWALT
- Manufacturer: DEWALT
- Color: Yellow
- Dimensions: Height: 0.63 Inches Width: 13.63 Inches Length: 17.0 Inches Weight: 1.0 Pounds `
Features
- Thin kerf for fast and smooth cutting action
- Computer balanced plate reduces vibration for improved accuracy and better finish
- Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy
10. MANTISTOL MC-330 13” Pro Laminate Floor Cutter with Installation Kit …
- Brand: MANTISTOL
- Manufacturer: CutTool Ltd.
- Color: Black
- Dimensions: Height: 3.149606296 Inches Width: 12.3622047118 Inches Length: 23.3858267478 Inches Weight: 18.73929227 Pounds `
Features
- For Laminate, Multi-Floor, Bamboo flooring, Parquet, solid wood, Deck-Floor-Boards, fiber-cement siding, rubber cove base, LVT, VCT, SPC, LVP, WPC, Vinyl Flooring and more， up to 13” wide and 16mm ( 5/8”) thick.
- Sturdy high-quality steel and Heavy duty aluminum construction. 4 mm thick tungsten steel sharp blade, included a 600 Grit hone stone to keep sharp. Installation Kit with Tapping Block, Pull Bar and Spacers (With 20 Spacers)
- If you use it for business purposes, make sure you have a replacement blade. The general floor width is 8 inches, and only about half of the blade is used for each cut. When this side of the blade becomes dull, the floor can be moved to the other side of the workbench and work with the other half of the sharp blade, a complete double Supported worktable provides smooth, wobble-free and quiet cutting.This configuration, $159.9 is a unique price on the market, and it is a great value for money!
- 37-1/4″ Handle for increased leverage with less effort. No electricity, no dust, quick, quiet and Easy to use. Item Weight 18.7 lbs, DIY For Household and Business, Strong and Durable， Preferred for business！
- Blades are consumables. If the whole cutter is damaged due to improper operation, it will not be covered by the one-year warranty.
I have always had an interest in woodwork, since my early years watching my old man work at his sawmill shop. Since then, I always knew that the career would shape my life, and I was not surprised when my old-time friend asked to partner with me 5 years ago to start a wood workshop at our home county. I specialize in woodcutting, and like Eric likes to say, I have my way with the saw. I do not mean to blow my trumpet, but I could say that God blessed me with the best hands for the job, and I love the profession I am in.
Latest posts by Johnson (see all)