Did Buck Brothers Lathe Chisels Include Bowl Gouges

No, Buck Brothers lathe chisels did not include bowl gouges. Bowl gouges are a specific type of chisel designed for shaping and smoothing the inside of a bowl. They have a curved blade and are held at an angle to the wood while in use.

Buck Brothers was a well-known manufacturer of woodworking tools, and their lathe chisels were no exception. While they didn’t specifically manufacture bowl gouges, many of their chisels could be used for this purpose. Their chisels were made from high-quality steel and were very durable, making them ideal for use on a lathe.

If you’re looking for a good set of lathe chisels, Buck Brothers is definitely worth considering.

Why Vintage Turning Chisels with Jon Siegel

What Chisels for Bowl Turning?

Assuming you would like a blog post discussing the different types of chisels one might use for bowl turning: When it comes to woodturning, there are many different ways to go about it – and that includes the tools you use. In this case, we’re talking about chisels.

While you might not think that there’s much difference between one type of chisel and another, the fact is that each has its own specific purpose when it comes to woodturning. So, if you’re looking for the best chisels for bowl turning, here are a few options to consider… One of the most popular types of chisels for bowl turning is known as a “spindle gouge.”

This particular type of gouge is designed specifically for shaping and smoothing spindles (which are often used in chair legs, stair rails, etc.). When using a spindle gouge, it’s important to keep the bevel angle fairly shallow (around 30 degrees) in order to avoid catching on the workpiece. Another option is a “bowl gouge.”

As the name implies, this type of gouge is designed specifically for bowl turning. Bowl gouges have a more aggressive bevel angle (usually around 45 degrees) which allows them to cut more quickly and easily through thicker pieces of wood. When using a bowl gouge, it’s important to keep the tool well-supported in order to avoid vibrations (which can cause unwanted chatter marks).

Finally, there’s also something called a “parting tool.” Parting tools are primarily used for cutting small grooves or parting off waste material from your workpiece. They have a very thin blade with sharply ground teeth that make them ideal for precise cuts.

However, because they are so thin, they can be prone to breaking if used improperly – so be careful! So there you have it – three different types of chisels that can be used for bowl turning (and other forms of woodturning). Each has its own specific purpose and function, so choose carefully based on what you need/want to accomplish with your project.

Where are Buck Brothers Chisels Made?

Buck Brothers chisels are made in the United States. The company has been making chisels since 1869 and they are currently based in Virginia. All of their chisels are made from high-carbon steel and they offer a wide variety of sizes and styles to choose from.

What are the Different Lathe Chisels For?

There are a wide variety of lathe chisels available on the market, each designed for a specific purpose. The most common types of lathe chisels are: 1. Turning/Boring Chisels: These chisels are designed for cutting and shaping wood on a lathe.

They come in a variety of sizes and shapes, including round, square, and V-shaped. 2. Parting Chisels: These chisels are used to create clean cuts in the wood, separating different parts or pieces. They typically have a very sharp blade and can be quite dangerous if not used properly.

3. Spindle Gouges: These chisels are used to create smooth, curved surfaces on the wood. They come in different sizes and shapes depending on the desired effect. 4. Skew Chisels: These chisels have a blade that is angled (or skewed), which makes them ideal for creating smooth, curved cuts.

Where are Sorby Chisels Made?

Sorby chisels are made in Sheffield, England. The company has been making chisels since the early 1800s, and they are one of the last remaining manufacturers of hand-forged chisels in the world. All of their chisels are still made by hand in their Sheffield factory, using traditional methods that have been passed down through generations of craftsmen.

The company produces a wide variety of chisels for woodworking, including gouges, paring chisels, mortise chisels, and carving tools. They also offer a bespoke service where they can make custom-shaped or sized chisels to meet the specific needs of a customer. If you’re looking for high-quality handcrafted woodworking tools, then Sorby is definitely worth checking out.

Their centuries of experience and attention to detail means that you’ll be getting a top quality product that will last you for many years to come.


Buck Brothers lathe chisels were among the first to include bowl gouges, and they quickly became a staple for woodturners. The company’s chisels are known for their durability and sharpness, making them a favorite among professionals and hobbyists alike.


Leave a Comment