The Robert Sorby Standard Hss Bowl Gouges are a set of three high-speed steel gouges that are designed for use on wood bowls. The set includes a 3/8″, 1/2″, and 5/8″ gouge, and each one is made from M2 high-speed steel with a Rockwell hardness of 62-64. The gouges have a standard flute length of 8″ and a cutting depth of 1″.
Review of Robert Sorby Standard Hss Bowl Gouges
I recently had the pleasure of using a set of Robert Sorby Standard Hss Bowl Gouges and I have to say, I was impressed! These gouges are made from high-speed steel and are designed for bowl turning.
They come in a variety of sizes (1/4″, 3/8″, 1/2″, 5/8″, 3/4″ and 1″), so you can find the perfect size for your project. The gouges are also very well balanced, which makes them easy to control. I used the gouges to turn a small bowl and they worked great.
The cuts were clean and precise. I also appreciated how sharp the edges were – it made turning much easier than with duller tools. Overall, I’m very pleased with these gouges and would recommend them to anyone looking for quality bowl-turning tools.
New Bowl Gouge's first sharpening with Tormek
Table of Contents
Where are Sorby Tools Made?
Sorby tools are made in Sheffield, England. The company has been making tools since the early 1800s and is one of the oldest companies in Sheffield. Sorby tools are known for their high quality and durability.
What is the Best Grind for a Bowl Gouge?
There is no definitive answer to this question as it depends on a number of factors, such as the type of wood you are working with, the desired finish and the individual preferences of the woodworker. However, there are a few general tips that can be followed when choosing a grind for a bowl gouge.
Firstly, it is important to consider the type of material you will be working with.
Softer woods will require a different grind than harder woods. Secondly, the desired finish should be taken into account. A rougher grind will be needed for a rustic finish, while a finer grind will be better suited for a smoother finish.
Finally, it is also worth considering the personal preferences of the woodworker. Some people prefer sharper edges while others find that blunt edges work better for them. In general, however, most bowl gouges will come with one of three different types of grinds – roughing, spindle or detail.
Roughing grinds are designed for quickly removing large amounts of material and are ideal for shaping bowls and other objects from scratch. Spindle grinds are more versatile and can be used for both roughing and finishing work. Detail grinds are mainly used for finishing work and creating delicate details.
How Do You Identify a Bowl Gouge?
If you’re new to woodturning, you might not know how to identify a bowl gouge. Here’s a quick guide:
A bowl gouge is a specialized tool that’s used for turning bowls on a lathe.
It has a curved blade with a fluted edge that’s designed to quickly remove material while leaving a smooth finish. To identify a bowl gouge, look for these key features: -A curved blade: This is what makes a gouge ideal for turning bowls.
The curve of the blade helps it hug the shape of the bowl as it turns, making it easier to remove material evenly. -A fluted edge: The flutes on the edge of the blade help clear away chips and debris as you turn, keeping the surface of your workpiece clean. -A comfortable handle: Most bowl gouges have handles that are designed to be held in one hand, with your fingers wrapped around them for control.
Look for a handle that feels comfortable in your hand and gives you good grip.
What Angle Should a Bowl Gouge Be Sharpened To?
There are a few different schools of thought when it comes to sharpening a bowl gouge, but the general consensus is that the angle should be somewhere between 25 and 35 degrees. The reason for this is that you want the cutting edge to be strong enough to handle the tough wood grain of a bowl blank, but not so sharp that it’s prone to chipping or breaking.
One method for finding the perfect angle is to hold the bowl gouge up to a spinning wheel and see where the blade catches.
Another is to use a honing guide set at 25 degrees and sharpen until you’ve created a burr on the back side of the blade. Then, increase the angle by a couple of degrees and repeat until you’ve found your sweet spot. Once you’ve got your angle sorted, it’s time to get busy turning some beautiful bowls!
Robert Sorby Roughing Gouge
A Robert Sorby roughing gouge is a great addition to any woodturner’s toolkit. This type of gouge is designed for quickly removing large amounts of material from a workpiece, making it ideal for roughing out bowls, platters, and other turned projects. The Sorby roughing gouge features a deep flute that allows for easy removal of shavings, and the wide blade provides excellent support during heavy cuts.
When using this gouge, it is important to keep the blade perpendicular to the workpiece to avoid catching and tearing the wood. With proper care and use, a Sorby roughing gouge will last for many years and provide excellent results.
Robert Sorby Bowl Gouge
If you’re a woodturner, then you know the importance of having a good bowl gouge in your toolkit. And when it comes to bowl gouges, there’s none better than the Robert Sorby Bowl Gouge.
This English-made tool is crafted from the finest Sheffield steel and features a fluted blade that’s been hardened to Rockwell 65 for optimum edge retention.
The blade is also ground to a 30 degree bevel, making it ideal for both roughing out bowls and finishing them to a high standard. The Robert Sorby Bowl Gouge also comes with a comfortable ergonomic handle that makes it easy to use for extended periods of time. Plus, the handle has been designed so that it won’t slip in your hand, even when you’re working with wet wood.
If you’re looking for the best bowl gouge on the market, then look no further than the Robert Sorby Bowl Gouge. It’s sure to become one of your favorite tools in no time!
Robert Sorby Fingernail Bowl Gouge
A Robert Sorby fingernail bowl gouge is a great tool for any woodturner. This type of gouge has a very thin, sharp blade that is perfect for getting into tight spaces and making precise cuts. The blade is also beveled on both sides, which makes it easy to control the depth of your cut.
The handle on this particular model is ergonomically designed for comfort and control, and the overall weight and balance of the tool make it easy to use. If you’re looking for a high-quality bowl gouge that will help you create beautiful turned projects, then this is definitely the tool for you.
The Robert Sorby Standard Hss Bowl Gouges are a great set of tools for any woodworker. The gouges are made from high quality steel and are designed to be durable and easy to use. The set includes three different sizes of gouges, each with a different purpose.
The small size is great for detail work, the medium size is perfect for general shaping, and the large size is ideal for roughing out a shape. These gouges are a great investment for any woodworker who wants to have a good quality set of tools that will last them for years to come.